This is the Standard Manufacturing S333 Thunderstruck revolver:

Thunder 1

It’s an innovative, 8-round revolver which fires two rounds of .22WMR (.22mag) with one pull of the trigger.

OK, if you like this not-so-little handgun, you might not want to read this review. Just move along and save yourself some time.

No, really.

If you have to think about it, here’s another pic to give you some time:

Thunder 2

The actual S333

* * *

For those who’ve stuck around …

… good lord, don’t buy one of these things as a self/home defense gun. If you want it just because it’s kinda geeky and weird, then cool. If you want to actually use it, go spend your money on almost anything else. Seriously.

Why do I say this?

Because, for the ostensible use of the gun as a self/home defense tool, it is almost entirely unsuited. Yeah, that’s my biased opinion, on having shot the thing.

Oh, you want details? Reasons for this opinion? Fair enough.

When I first heard of it, I saw that it was .22WMR, out of a 1.25″ barrel. Now, since it is being shot out of a revolver, you can add in the length of the cylinder, and come up with an overall barrel length of about 3″.

.22WMR out of a 3″ barrel isn’t exactly useless. I mean, it beats harsh words. And, in fairness, it beats your typical .22lr. A little. You can expect about 100-110ft/lbs of energy from it. The best-performing .22lr from the same length barrel is about 90ft/lbs. Same for .25ACP.

And, if you think in terms of having two such bullets fired simultaneously, that gets you up to about 200-220ft/lbs of energy. Not impressive, but I wouldn’t want to be shot by it. I mean, it’s better than .32ACP.

Well, it would be if for one big problem: keyholing.

See, with such a very short barrel, the .22WMR bullets aren’t stabilized. They come out of the barrel, and tumble. If the bullet tumbles upon leaving the barrel, it will quickly lose energy to aerodynamic forces. And likewise, if it hits something more solid, it will also lose energy more quickly. Which will really mess up their effectiveness in penetrating deep enough into an attacker in order to be effective. Because, remember, this is supposed to be a self/home defense gun.

See for yourself:

Thunder 3


Yeah, of the 8 bullets I fired (from about 5 yards, aiming at the center of the target), 7 have keyholed.

This is something that almost every review video I watched also noted. The S333 keyholes at least 50% of the time, and usually more.

So let’s go back to the comparison with .32ACP. Keyholing can happen with any caliber and almost any gun, but it tends to be rare in well-designed guns and properly matched ammunition. So, usually, you can rely on fairly consistent penetration out of .32ACP. Which, according to independent testing by Brass Fetcher, will give you 7-10″ of penetration in 20% ballistic gel. And .22WMR will do about as well.

But not if it keyholes. Which it does, out of the S333.

Now, Standard Manufacturing has said that this is something that they’re working to correct. So perhaps later versions of the gun will not have this problem.

I still wouldn’t want it. Why?

The S333 is as large and weighs (18oz) as much as many common compact 9mm semi-auto handguns. It’s larger and weighs more than most small .380 semi-auto handguns. It’s larger and weighs more than most small frame .38/.357 revolvers. Any of those alternatives offer much more potent cartridges, even in comparison to two simultaneous .22WMR rounds. And with the S333, you have four shots — your typical small revolver will be 5 or 6, and small semi-auto guns are typically 6 or more.

The S333 is also awkward and difficult to shoot. The unusual “two finger” trigger really changes how you can grip the revolver, changing how you aim and control it. It’s also a very long and very hard trigger pull — something in excess of 12 pounds, by most reports. If, like most people, you want to use a second hand to support your shooting hand (which is even more necessary when you only hold the gun with your thumb and two small fingers), about the best thing you can do is grip the wrist of the shooting hand in a modified “cup & saucer” style grip. Otherwise, the fingers of your supporting hand will be in the way of the trigger coming all the way back, which is necessary for it to fire.

Here, see what I mean with this short video of me shooting it:


I think the awkwardness of the grip and the two-finger trigger explains why most people tend to shoot the revolver high and to the right when they first encounter it. All three of us at BBTI did. Almost every review video I watched had the same thing.

I’m sure you could learn to adapt to this, and develop a secure and reliable method of shooting the gun with practice. But as a “grab it and use it” self-defense gun, it’s a problem.

One minor note while the video above is fresh in mind: did you notice the amount of flash in two of the shots? Yeah, that’s another factor of such short barrels with the .22WMR. That was while shooting it on a typical partly cloudy day in the middle of the morning. Not a major problem, but something to register.

One last thing: price. As you can see on the first pic, this particular S333 sold for $419.99, which is just under the MSRP. So while it isn’t really pricey, it isn’t cheap. In fact, it seems to be a very solid and well-made gun. The fit and finish were good. The minor problems we had with it were probably just because it was brand new (it hadn’t been fired previously). The trigger is, as noted, long and very heavy, but reasonably smooth if a little mushy. So, overall, if you wanted one of these just because it’s unique and quirky, then I think it’s a reasonably-priced gun.

But if you are looking at it as a self/home defense gun? Or even as a “back-up” for that use?

I think you have much better options.

Jim Downey


This content originally appeared at text and was written by James Downey This content is syndicated and does not necessarily reflect the views or positions of The Liberal Gun Club

%d bloggers like this: