Light for shotgun?

Reviews and discussion of shotguns.

Moderators: admin, Inquisitor, ForumModerator, WebsiteContent

Post Reply
User avatar
DavidMS
Verified Member
Verified Member
Posts: 615
Joined: Thu Aug 27, 2015 10:22 pm
Location: Virgina
Contact:

Light for shotgun?

Post by DavidMS »

I am looking to mount a flashlight to my FN P-12. I could get one with a remote switch and use 3M VHB Trim Tape or industrial Velcro to attach it to the shotgun forearm (both practical and tacticool). Alternatively, I could go with the push button on the rear of the light (not as practical or tacticacool).

What flashlight(s) do you use on a HD shotgun? Do you use it with a Remote Pressure Switch? If so how do you attach the switch if there is no picatinny rail or similar mounting surface to attach it?

User avatar
senorgrand
Verified Member
Verified Member
Posts: 21506
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Light for shotgun?

Post by senorgrand »

I would go TLR 1 with no remote switch.
Image

"Person, woman, man, camera, TV."

User avatar
zzrguy
Been around awhile
Posts: 382
Joined: Sun Aug 13, 2017 6:16 pm
Contact:

Re: Light for shotgun?

Post by zzrguy »

If you usinh it for home defence I like this over a light.

https://www.laserlyte.com/products/sigh ... enter-mass
It's time to elect leadership not re elect it.
Drain the swamp!

User avatar
DavidMS
Verified Member
Verified Member
Posts: 615
Joined: Thu Aug 27, 2015 10:22 pm
Location: Virgina
Contact:

Re: Light for shotgun?

Post by DavidMS »

I decided against a laser or light/laser combo because a laser will not provide target illumination and a light/laser will add complexity.

User avatar
zzrguy
Been around awhile
Posts: 382
Joined: Sun Aug 13, 2017 6:16 pm
Contact:

Re: Light for shotgun?

Post by zzrguy »

Sitting back and thunken a little mpre on the subject i would go with a push button it i could not find on that mounts on the sliding fowend.
1. The wire would need to be long to travel the length of the stoke and would hang down and could snag on something or give your adversary something else to grab hold of. ( even the slinky cord type wire.)

2. Depending how long the strip switch is it may limit your hand placement on the forend.( If your a smaller person your hand may be back to far to reach the strip switch.)
It's time to elect leadership not re elect it.
Drain the swamp!

User avatar
Bucolic
Verified Member
Verified Member
Posts: 8143
Joined: Sun May 20, 2012 5:51 am
Location: Southern PA.
Contact:

Light for shotgun?

Post by Bucolic »

I have a light and laser on my Mossberg 500 in .410 bore and a push button light on my 500 12 gauge. The former has two pressure switches.

Here are some quick pictures. The setup on the .410 is a cheapie UTG combo that has worked great for at least 5 years and several hundred rounds of buckshot. It has two pressure switches, one under the thumb for the light and the other under the index finger for the laser. The coiled cables to the switches have never given me any problems whatsoever once I decided on how to route them.

The 12 gauge has an Elzetta ZSM-T Mount and a Streamlight 88850 poly flashlight. The push button switch is a bit of a stretch for my thumb but not outrageous. I had to modify the mount a bit to allow the fore end to rack fully. If you were to go with one, PM me for details.

As promised...

Image

Image

Image
Image

User avatar
TrueTexan
Verified Member
Verified Member
Posts: 19009
Joined: Sat Dec 01, 2012 7:28 pm
Location: LGC MEMBER: The "Crazy" part of Denton Texas
Contact:

Re: Light for shotgun?

Post by TrueTexan »

I'm using a TLR-4 on My Mossberg 590 Shockwave with a rail . If you can add a rail it makes it easy to operate both light and laser.
Attachments
Mossy 590shockwave-resized.jpg
Facts do not cease to exist because they are ignored.-Huxley
The illegal we do immediately; the unconstitutional takes a little longer-Kissinger
Reasoning will never make a Man correct an ill Opinion, which by Reasoning he never acquired.-Swift

User avatar
DavidMS
Verified Member
Verified Member
Posts: 615
Joined: Thu Aug 27, 2015 10:22 pm
Location: Virgina
Contact:

Re: Light for shotgun?

Post by DavidMS »

Thank you. I am thinking of a CDM Gear (http://cdmgear.com/) MTR or MTC light mount. Still not sure on the flashlight. The X300UA looks like a good choice but pricey. I have a TLR-1S pistol light and would not think too hard about buying a 2nd for the shotgun.

I looked at the Fenix lights and they have UIs that are too complicated. I want something very simple.

User avatar
DavidMS
Verified Member
Verified Member
Posts: 615
Joined: Thu Aug 27, 2015 10:22 pm
Location: Virgina
Contact:

Re: Light for shotgun?

Post by DavidMS »

I ended up getting a Streamlight TLR-1S with a tape switch. It seems good but I have yet to take it back to the range.
Attachments
FN P-12 with a TLR-1s (with tapeswitch) on a CDMGear Mount.
FN P-12 with a TLR-1s (with tapeswitch) on a CDMGear Mount.

User avatar
YankeeTarheel
Verified Member
Verified Member
Posts: 12338
Joined: Tue Aug 22, 2017 10:01 pm
Location: The Jughandle State
Contact:

Re: Light for shotgun?

Post by YankeeTarheel »

Can you mount a light that does this?

Image
""If you can convince the lowest white man he's better than the best colored man, he won't notice you're picking his pocket. Hell, give him somebody to look down on, and he'll empty his pockets for you." -- LBJ

User avatar
TrueTexan
Verified Member
Verified Member
Posts: 19009
Joined: Sat Dec 01, 2012 7:28 pm
Location: LGC MEMBER: The "Crazy" part of Denton Texas
Contact:

Re: Light for shotgun?

Post by TrueTexan »

YankeeTarheel wrote:Can you mount a light that does this?

Image
No but it would be cool to have one that does Santa with a Shotgun.
Facts do not cease to exist because they are ignored.-Huxley
The illegal we do immediately; the unconstitutional takes a little longer-Kissinger
Reasoning will never make a Man correct an ill Opinion, which by Reasoning he never acquired.-Swift

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests