i see we're obsessing over donald and germs and the dem party's ineptness lately, and i find it annoying. so i offer this distraction.
this is my latest purchase, a smith and wesson model 4 topbreak, circa 1890s i believe. the finish is entirely a rich brown patina, there's some rifling left and while it's obviously worn, it kinda-sorta works.
kinda-sorta.
at the range it had several misfires, light primer strikes.
there's some play in the hinge at the front of the trigger guard, so that there's a little wiggle between the frame and barrel-cylinder assembly.
the extractor star is slow to retract, maybe dirty?
the firing pin sometimes sticks in the hole through the frame. this would explain the semi-random light strikes.
i think it can be redeemed.
what do you experts say?
Re: help me diagnose this revolver.
4Beyond, "listen to Marlene," I have no insight.
Cool piece though. Very Sherlock Holmes.
Cool piece though. Very Sherlock Holmes.
Re: help me diagnose this revolver.
5I'd remove any wood/rubber/bakelite and soak in a good penetrating oil for a few days and then tear down and detail. The soak may prevent broken parts and damaged threads. There's an outside possibility of a make and model specific tutorial online.
I: ALL GUNS ARE ALWAYS LOADED
II: NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT WILLING TO DESTROY
III: KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
IV: BE SURE OF YOUR TARGET AND WHAT'S BEHIND IT
II: NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT WILLING TO DESTROY
III: KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
IV: BE SURE OF YOUR TARGET AND WHAT'S BEHIND IT
Re: help me diagnose this revolver.
6I'd like "Full Spring Replacement" for 500, Alex.
The wiggling between the frame and cylinder might be your problem though. If S&W no longer works on these types of revolvers, I'd check with Uberti to see if their gunsmiths can tighten things up for you.
1. What's she chambered in? Just out of curiousity.
2. If you ever want to sell, lmk.
The wiggling between the frame and cylinder might be your problem though. If S&W no longer works on these types of revolvers, I'd check with Uberti to see if their gunsmiths can tighten things up for you.
1. What's she chambered in? Just out of curiousity.
2. If you ever want to sell, lmk.
If liberals interpreted the Second Amendment the way they interpret the rest of the Bill of Rights, there would be law professors arguing that gun ownership is mandatory. - Mickey Kaus, The New Republic
Re: help me diagnose this revolver.
7Full spring replacement might be '500', worse yet it might be 'unobtainium'. Most Smiths like to replace parts, not fabricate them.MayhemVI wrote: Wed Mar 25, 2020 1:46 pm I'd like "Full Spring Replacement" for 500, Alex.
The wiggling between the frame and cylinder might be your problem though. If S&W no longer works on these types of revolvers, I'd check with Uberti to see if their gunsmiths can tighten things up for you.
1. What's she chambered in? Just out of curiousity.
2. If you ever want to sell, lmk.
Once it's clean and oily I'd try it again, the light strikes might be gone. The wiggles may take a little more on a 130 year old pistol.
It is a handsome rascal.
I: ALL GUNS ARE ALWAYS LOADED
II: NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT WILLING TO DESTROY
III: KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
IV: BE SURE OF YOUR TARGET AND WHAT'S BEHIND IT
II: NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT WILLING TO DESTROY
III: KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
IV: BE SURE OF YOUR TARGET AND WHAT'S BEHIND IT
Re: help me diagnose this revolver.
8oops, sorry, .32 S&W
it is a fine paperweight.
it is a fine paperweight.
i'm retired. what's your excuse?
Re: help me diagnose this revolver.
9Were it mine, I'd do the soak in penetrating oil for several days then take it apart on a clean table. Marlene takes pics at every stage so as to remember how it goes back together.
CDFingers
CDFingers
Crazy cat peekin' through a lace bandana
like a one-eyed Cheshire, like a diamond-eyed Jack
like a one-eyed Cheshire, like a diamond-eyed Jack
Re: help me diagnose this revolver.
10hmm, clean table. that's a problem. that could take a day or so.
i'm retired. what's your excuse?
Re: help me diagnose this revolver.
11NOW you have a project.lurker wrote: Wed Mar 25, 2020 3:29 pm hmm, clean table. that's a problem. that could take a day or so.
Or, just order a new table from Amazon...
Re: help me diagnose this revolver.
12The best way to clean a table is to invite a Labrador retriever over, then stand it near the table and pull out a tennis ball. Clean table. Now, the floor might be a mess. Not my department.
CDFingers
CDFingers
Crazy cat peekin' through a lace bandana
like a one-eyed Cheshire, like a diamond-eyed Jack
like a one-eyed Cheshire, like a diamond-eyed Jack
Re: help me diagnose this revolver.
14Nice Smith. Take a close look at the firing pin since it sound like it is either bent or maybe peened. The slight wobble is normal and should disappear when the hammer is fully cocked and trigger pulled. Hold the hammer back and pull trigger and check lock up then. It was designed for smokeless powder so any modern 32S&W short should work.
Here are some of my Top Breaks:
Left to right: S&W DA Model 4 in 38S&W, Hopkins & Allen Safety Police in 32S&W (the cartridge is a 38S&W for size) and a Singapore Police Force Webley IV in S&W 38/200:
Here are some of my Top Breaks:
Left to right: S&W DA Model 4 in 38S&W, Hopkins & Allen Safety Police in 32S&W (the cartridge is a 38S&W for size) and a Singapore Police Force Webley IV in S&W 38/200:
To be vintage it must be older than me!
The next gun I buy will be the next to last gun I ever buy. PROMISE!
jim
The next gun I buy will be the next to last gun I ever buy. PROMISE!
jim
Re: help me diagnose this revolver.
15Nice collection.sig230 wrote: Thu Mar 26, 2020 7:53 am Here are some of my Top Breaks:
Left to right: S&W DA Model 4 in 38S&W, Hopkins & Allen Safety Police in 32S&W (the cartridge is a 38S&W for size) and a Singapore Police Force Webley IV in S&W 38/200:
"Everyone is entitled to their own opinion, but not their own facts." - Daniel Patrick Moynihan
Re: help me diagnose this revolver.
16nice, very nice. "some of".
i also have 3, the smith and 2 H&Rs, one of them in '38s&w, the other .32. none of them works reliably. i'll get up a better post with pics in a while.
i also have 3, the smith and 2 H&Rs, one of them in '38s&w, the other .32. none of them works reliably. i'll get up a better post with pics in a while.
i'm retired. what's your excuse?
Re: help me diagnose this revolver.
17Here is a somewhat unusual H&R. It was before H&R assigned model numbers and before they settled on the "Defender" name and so most likely from 1937 or 1938. It is 38S&W and the serial number is 234.lurker wrote: Thu Mar 26, 2020 2:25 pm nice, very nice. "some of".
i also have 3, the smith and 2 H&Rs, one of them in '38s&w, the other .32. none of them works reliably. i'll get up a better post with pics in a while.
similar one from Jim Hauff's book,
To be vintage it must be older than me!
The next gun I buy will be the next to last gun I ever buy. PROMISE!
jim
The next gun I buy will be the next to last gun I ever buy. PROMISE!
jim